fuel medz - Increases Gas Mileage! The One That Really Works!

Combustion System Catalyst
Fuel Medz™ is not just a fuel additive; it is a new approach to fuel system performance. Treating your engine the Fuel Medz™ way prevents new carbon deposits from forming in the combustion chamber. This means that your engine stays clean, the environment stays clean, and you receive optimal engine performance and fuel efficiency every mile of every day.
Let's face it, the fuels (gasoline and diesel) that we put into our vehicles are dirty, and they don't burn completely. This means that particles are left behind, which together, form hard carbon deposits that harbor poisonous gases such as Carbon Monoxide. When we operate our vehicles, many of these gases are emitted into the air, thus causing air pollution.
Automobiles don't have to be a major cause of the atmospheric pollution in our cities. Drastic measures, often taken by federal and state agencies to reduce this pollution, are not necessary. If everyone used Fuel Medz™, a very substantial percentage of all kinds of automotive pollution in the atmosphere would be eliminated. Because
Fuel Medz™ is a catalyst; it will burn off the carbon deposits in the engine that normally lead to emission problems and keep the engine free of new deposit formation.
When using Fuel Medz™:
•
Black smoke from automobiles, trucks, and buses could be virtually eliminated.
•
Nitrogen oxides would be greatly reduced.
•
Corrosive sulfur oxides that cause acid rain could be minimized.
•
Carbon monoxide and ground level ozone toxins would be significantly diminished.
•
The need for oxygenated fuel would be reduced.
Fuel Medz™ has been shown to reduce emissions up to:
Carbon Monoxide 15-20%
Hydrocarbons 25-30%
Nitrogen Oxides 15-25%
Sulfur Oxides 35-50%
Smoke 50-90%
Treats the Engine
Maybe the most important reason for using Fuel Medz™ is that your engine will last longer. Deposit build-up in the engine results in greater friction, causing more wear. Because Fuel Medz™ is a catalyst, it will burn off any existing deposits. Consistent use of Fuel Medz™ will also prevent new deposits from being formed in their place. The catalytic action that occurs helps to improve the longevity of the internal combustion engine reduces maintenance costs. Below is a diagram of how Fuel Medz™ affects the internal combustion engine.

Improves Fuel Economy!
Carbon deposits in the combustion chamber can be thought of as a hard absorbent sponge. During the combustion process, they actually soak up fuel and prevent it from burning. This unburned fuel then gets exhausted as unburned hydrocarbons that are poisonous emissions. Carbon deposits can get so hot that they will act like a spark plug, giving off a spark too early. This is known as pre-detonation, or 'knock and ping', and is normally covered up by using higher octane fuels. Carbon deposits put acid and mineral contaminates into your oil and lube. This makes you to have to change your oil more frequently and causes your engine to be less efficient. Carbon deposits can cover the tips of your injectors, inhibiting the spray pattern, which causes a decrease in fuel efficiency and a loss in power.
Fuel Medz™ removes carbon deposits and prevents them from coming back!!! In a combustion chamber that is free of carbon deposits there will be a more complete combustion of hydrocarbons. There will be no need for higher octane fuels, and there will be an increase in oil, engine and fuel efficiency. The combination of these things account for an improvement in fuel economy. This means that with the consistent use of Fuel Medz™ we can get more miles out of each gallon of gas; and more miles equates to less money spent on fuel. From a number of field studies performed, we've found that our customers have saved up to 20% on fuel costs with the consistent use of Fuel Medz™. In addition to the savings on fuel consumption, Fuel Medz™ will also save you on maintenance costs.
Simple Explanation!
Because of the impurities in petroleum-based fuels, carbon deposits form along the surfaces of the combustion chamber and will not combust at temperatures lower than 600oC. This becomes a problem because the surfaces of the combustion chamber stay cooler than 600oC, and will not allow these deposits will not burn off by themselves. These deposits are the problem. They cause your fuel mileage to drop over the life of your vehicle, causing you to have to use higher octane fuels. They are the primary cause of automotive emissions, and are what cause your motor oil to get dirtier faster. They plug up your fuel injectors cause a decline in your overall engine performance. As a catalyst, Fuel Medz™ lowers the Energy of Activation of the rate determining step to 200oC. This allows the carbon deposits to burn off at temperatures as low as 200oC as opposed to 600oC.

Technical Discussion
Increasing Surface Area
The approach being taken by Fuel Medz™ differs from that of our competitors’ products in that we are using active particles that are only 10 nanometers across. This creates a greater surface area for catalyzing the required reactions. It also means that Fuel Medz™ can be used at concentrations as low as 20 parts per million in hydrocarbon fuels. This is one-tenth the concentration of competitive additives. These micro - particles also remain more evenly suspended in the fuel.
Unique Metal Compound
Fuel Medz™ uses a complex of chemical compounds including elements from both Group 8 and a unique material not categorized as belonging to any one of the 18 Groups in the Periodic Table. This state-of-the-art formula provides
Fuel Medz™ with the technology that surpasses all other commercial fuel related additive products.
Fuel Medz™ fuel tablets were developed to make fuel treatments easier and less expensive. With Fuel Medz™, there is less packaging to pay for and no messy liquids to handle. They are also lighter in weight and non-hazardous. This makes them easier and less expensive to ship and great for importing and exporting.
Fuel Medz™ is a combustion manager, formulated to address combustion side fuel problems that are encountered with gasoline, diesel, fuel oil, and residual fuels. They contain potent multi-functional components that act as deposit modifiers and combustion surface modifiers.
Fuel Medz™ deposit and combustion surface modifiers prevent deposit build-up in open flame combustion equipment and internal combustion engines. Fuel Medz™ deposit and combustion surface modifiers catalyze the combustion of existing surface deposits and inhibit combustion particle agglomeration. Benefits include improved fuel economy, reduced emissions, cleaner oil, reduced maintenance cost, reduced wear, and lower friction.
The recommended treatment ratio for Fuel Medz™ is shown in the chart below. Fuel treated with Fuel Medz™ at recommended treatment ratios does not alter or change any of the commonly used fuel specifications.
Fuel Medz™ is recommended for small-scale treatment as consumer vehicles and light to heavy-duty trucks.
Suggested Use:
23 - 40 Liters (6–10 U.S. Gallons) ½ Tab
41 - 59 Liters (11–15 U.S. Gallons) 1 Tab
60 - 85 Liters (16-22 U.S. Gallons) 1½ Tabs
86 - 108 Liters (23-28 U.S. Gallons) 2 Tabs
109 - 130 Liters (29-34 U.S. Gallons) 2½ Tabs
131 - 159 Liters (35-42 U.S. Gallons) 3 Tabs
First tank: Use a Double Treatment
Every tank thereafter: Use regular use.
Fuel Medz™ Tabs should be used continuously to achieve maximum sustainable benefits.

WARNING: Do not exceed suggested use. If you want to save money on fuel costs, clean abrasive deposits out of your engine and keep them out, extend engine life, reduce your vehicles emissions, improve your overall performance, and clean the environment you live in, Fuel Medz™ is the easiest way to do it.
U.S. Environmental Protection Agency (EPA) registered.